Toyota 4Runner Window Tint Installation Guide

Installing pre-cut tint on your Toyota 4Runner (2010–2024)? Start with the right glass pattern, a clean work area and a plan for the windows that need extra care. This guide pairs a preparation checklist with an independent installation video.

Check Toyota 4Runner fitment · Shop the sides + rear tint kit

Prepare · Vehicle notes · Watch the video · Finish and get help

Before you remove a liner

• Confirm the year, body style and window configuration on your order. Identify each piece with its liner intact; do not peel it simply to test fit.
• Inspect for incorrect, damaged or defective pieces. Contact us before liner removal, cutting, heat shrinking or installation if something is wrong.
• Work out of wind and dust. Have film-safe glass cleaner, lint-free towels, an appropriate application solution and spray bottle, plus suitable squeegees ready. Follow the supplied film instructions for solution and heat use.
• Optional Starter Kit and Tool Set contents differ. Neither includes a spray bottle or heat gun; the Tool Set does not include mounting solution.

Toyota 4Runner: plan these windows first

• More than the front doors: inventory the rear-door, fixed-side and rear pieces as well. The front-only video is not proof that every kit piece fits.
• Moving tailgate glass: the rear window can move, so plan access and protect the new film from movement during its required curing period. Keep other users informed before they operate it.
• Rear-window details: inspect defroster lines and seals before starting. Do not scrape heating elements or attempt a difficult rear installation without the right technique.
• Factory privacy glass: note its presence when choosing shade; film over already-dark glass will not look the same as the same film on clear front windows.

Watch the installation example

Video by yelo autosports. This video shows the two front windows of a 2018 4Runner TRD Pro. It demonstrates cleaning, shaping and positioning, but uses hand-cut ceramic film. Our pre-cut kit and film specification differ. It does not demonstrate the rear doors, quarter glass or tailgate window.

Watch directly on YouTube if the player is unavailable. This independent creator is not affiliated with MotorPeak Supply.

Application sequence

1. Read the general pre-cut installation guide and supplied film instructions before starting. Protect interior surfaces and clean the glass and accessible edges thoroughly.
2. Check the piece orientation and any required forming step while the liner is still on. Pre-cut does not mean every curved pane can be installed without shaping. If unsure, use an experienced installer.
3. When ready, expose the adhesive without contaminating it, apply the recommended solution and position the film on the inside of the intended glass. Align carefully before firm squeegee passes.
4. Work solution out with the appropriate tool, keeping the film in position. Avoid hard creases, sharp tools on protected glass features and unnecessary heat. Inspect the perimeter before moving on.

After installation and support

Follow the supplied curing and window-use instructions; weather and film affect drying. Do not roll windows down or clean fresh film before the recommended period. Do not puncture bubbles or peel edges to investigate a problem—send us photos first.

Kit coverage: the standard product is sides + rear glass for the confirmed vehicle configuration. Full front windshield film is a separate optional product; roof glass is excluded. Check local tint requirements for each window before choosing a shade.

We are here to help. Contact MotorPeak Supply with your order number, vehicle details and clear photos. For unused items, contact us for return instructions and the correct return address; see our return policy before sending anything.

Ready to choose? Review Toyota 4Runner fitment or choose your tint kit.