Hyundai Sonata Window Tint Installation Guide
Install Hyundai Sonata tint on the rolling side windows before the fixed rear windshield. Match the body-specific door and quarter pieces first, then prepare access above the rear shelf for shaping and applying the rear film.
On a Sonata sedan, plan the door windows and the heated rear glass as separate jobs. Start by checking for an applied film edge; the rear heater lines stay on the glass when old film comes off. Protect the parcel shelf and the accessible lower rear-glass edge before cleanup, then choose the exact sedan pattern from the year ranges below.
Prepare Hyundai Sonata glass before applying film
The 2013 Sonata has heater conductors on the inside of the rear window. Hyundai warns against sharp tools and abrasive glass cleaners on that surface. Hyundai 2013 Sonata Owner’s Manual, Defroster, printed page 4–82.
Check the Sonata year limit
The catalog entry lists Sonata sedans from 1998–2014. These years include different configurations; choose the actual year and trim instead of treating the range as one interchangeable pattern. Listed ranges do not establish identical patterns or procedures across years. Select the exact year, body and trim. MotorPeak machine-cuts your selected vehicle pattern; contact us for unlisted years or modified glass.
Include hybrid and replacement-glass details
Enter the full trim and powertrain designation from the vehicle records, including Hybrid where applicable. Note replaced glass and any sensor housings before requesting windshield availability; the sides-and-rear listing does not confirm a windshield pattern.
Check the listed Hyundai Sonata pattern
| Body style | Model years |
|---|---|
| Sedan | 1998–2014 |
Use the Hyundai Sonata vehicle page to confirm the selection. Keep every liner attached while matching the pieces to the actual panes. If an edge or opening does not match, photograph it and ask for help before cutting or peeling.
Apply the matched pieces and check the edges
Protect the interior from application liquid, finish cleaning the accessible glass edges and follow the installation video and installation sequence. Pre-cut film may still need shaping on curved glass. Follow the supplied curing instructions before operating windows or cleaning fresh film.
For existing film, complete the Hyundai Sonata removal checks first. Confirm windshield and roof coverage separately from a sides-and-rear order. Send your vehicle details and photos if a supplied piece or glass feature is uncertain.
Your Hyundai Sonata fitting sequence
- Match and clean. Lay each piece on its liner, identify its intended pane and check orientation. Remove old film and glue first. Clean accessible glass edges and seals, then protect switches and trim from liquid.
- Fit a front rolling window. Lower it enough to reach the top edge. Wet the inside glass and exposed adhesive as the liner separates, position the film and squeegee with overlapping passes. Raise the pane carefully to finish the lower section without folding the film.
- Complete the remaining sides. Use the matching rear-door pieces where fitted, then the separate fixed panes. Keep moving gaps, hinges and latches clear; do not trim an unexpected piece merely to make it fit.
- Shape and apply the rear piece. Dry-check curved glass with the liner attached. Shape film on the exterior when needed, using controlled heat and keeping it moving; the final adhesive installation goes on the inside. Keep sharp tools away from heater or antenna traces and leave brake-light output unobstructed.
- Inspect and cure. Check edges, corners and trapped solution before cleanup. Keep newly tinted windows closed for at least five days and wait at least seven days before cleaning. Cold or humid weather can extend drying; mild moisture haze can take up to three weeks to clear.
If the film bunches on curved glass, review shaping and rear-glass access. For haze, bubbles or lifted edges, use the close-up troubleshooting guide.
Choose a machine-cut MotorPeak tint kit. Estimated 7–10 days total for cutting, processing and shipping. Check your state's finished glass-and-film requirements before selecting shades.