2018 Jeep Grand Cherokee SRT Window Tint Removal Guide

On a 2018 Jeep Grand Cherokee SRT, an easy front-door peel can still leave adhesive behind. Protect the deep door recess from cleanup liquid, inspect edges and remove cleaner residue before retinting. Treat rear glass with heating or antenna elements as a separate job.

A removal workflow for this SRT

1. Document the front glass before starting. Photograph existing scratches, film edges, and adhesive haze. Check that the window operates normally. Record any replaced glass or aftermarket surface treatment before selecting a tool or remover.
2. Protect the deep door recess. Keep runoff out of the switch panel, speaker, and door cavity. If an edge is inaccessible, get the correct service procedure or installer help instead of levering against a seal or pulling trim by trial and error.
3. Use a verified film-removal method. Follow the instructions supplied with your actual automotive film remover or have a tint professional carry out the removal. The video does not provide a validated heat setting for this vehicle. Do not improvise one from the owner's commentary.
4. Treat adhesive as a separate cleanup stage. After the film is off, examine the full pane and accessible edges. Choose a cleanup product approved for the actual glass and surrounding materials, follow its label, and remove the cleaner's residue as directed. Do not assume a blade shown on one door pane is appropriate for your glass.
5. Finish the inspection before retinting. Check for leftover film at the seals, adhesive streaks, scratches, and cleaner residue. New film needs a properly prepared surface; the partially cleaned result shown in the video is not the stopping point for a replacement installation.

For product-label preparation and waiting-time considerations, read the general removal and replacement guide. Film, adhesive, glass, and the chosen remover determine the work required; another owner's quick peel is not a time estimate for your Jeep.

Jeep's rear-glass instructions for the 2018 SRT

The 2018 Grand Cherokee SRT owner's manual warns against scrapers, sharp tools, and abrasive cleaning on the inside rear window. For cleaning around the heating elements, Jeep specifies a soft cloth, a mild washing solution, and wiping parallel to the elements. Its Glass Surfaces section also cautions about antenna-equipped glass.

This manufacturer guidance is glass care, not an approved tint-stripping procedure. The linked owner video does not demonstrate rear-glass removal. Have a tint installer assess old film over the rear elements, document any existing fault, and stop if a trace starts to lift. Do not transfer front-door scraping to the rear pane.

Choose the correct replacement Grand Cherokee tint

Our listed Grand Cherokee SUV range includes 2018. Select Jeep, Grand Cherokee, 2018, and SUV in the sides-and-rear tint kit, and include the SRT trim and any changed glass in your fitment details. A year listing is not a check of every trim-specific glass option; ask us to confirm anything uncertain before paying.

Choose replacement Grand Cherokee tint

Keep each protective liner attached while comparing the supplied pieces to your windows, then follow the Jeep Grand Cherokee installation guide. Windshield film is a separate purchase; a sides-and-rear kit does not replace the windshield strip shown in the video.

This page uses the identified SRT owner video and matching Jeep manual. It does not apply advice from a different-year Reddit post. Return to the removal guide directory for other verified examples.

2018 Grand Cherokee SRT: what the removal video shows

BJP LIFESTYLE — They MADE Me Remove My Window Tint! The creator identifies his vehicle as a 2018 Jeep Grand Cherokee SRT in the video description. This is an owner experience with front-door film and a windshield strip, not a professional rear-window removal lesson.

Watch the original video.

• 0:30–1:26: the owner discusses the deep door-window recess and protecting the door from cleanup liquid.
• 1:48–3:28: front-window film peeling leaves visible adhesive. An initially easy peel does not mean the glass is clean.
• 3:30–4:24: cleanup is discussed, including residue still remaining and the owner's dissatisfaction with an oily remover.
• 4:34–5:48: the other front window and windshield strip are addressed; additional cleanup remains at the end.

Use these observations to plan access and cleanup. The owner's rushed cold-weather heat-gun approach does not establish a safe temperature or a finished, retint-ready result. His inspection story does not establish the rules for your location, and this guide does not recommend copying his shade choices.

Looking for replacement tint? Compare Jeep Grand Cherokee pre-cut tint options and check your exact year, body and rear glass before ordering.