Ram 1500 Laramie 2019–2024 PPF Installation Guide

A Ram 1500 Laramie label is not enough to settle a full-truck pattern. Cab, bed and tailgate equipment must be matched before ordering. This guide helps you prepare that information and organize the installation.

Listed fitment: Ram 1500 Laramie · 2019–2024. Material: clear TPU PPF. Professional installation recommended; labor and tools are not included.

View this PPF kit — $899.99 · All vehicle guides and application basics

Check this before you peel the liner

Confirm the exact body generation, cab style, bed length, bumper finish and tailgate configuration. Do not substitute Ram 1500 Classic, TRX or another trim without checking. Public listing details do not establish every combination.

Compare the actual kit diagram with your vehicle while the film remains on its backing. Coverage and seams follow the supplied pattern; full vehicle does not automatically mean every trim surface, no seams or wrapped edges.

Your installation plan

Start with our preparation and application workflow, then use these checkpoints for your vehicle. These are planning checks, not a tested set of anchor points for this kit.

1. Verify the whole side profile

   Send MotorPeak a side photograph with cab and bed details. Match the kit’s door and bedside diagram to those proportions before the installer starts. A partial front kit fitting the truck would not prove full-body fitment.

2. Identify bumper and flare boundaries

   Note painted versus other surfaces, tow-hook openings, sensors, flares and any aftermarket equipment. Confirm compatible pieces and their intended end points. Do not assume a shared trim name settles optional exterior hardware.

3. Match the tailgate last on paper, first in planning

   Resolve standard versus other tailgate arrangements and camera/handle cutouts before purchase. During handover, inspect each supplied rear section with the tailgate in its normal operating positions and check that edges do not interfere with movement.

See the technique before attempting a panel

Watch the PPF installation demonstration on YouTube. This is third-party general technique using 3M film, not a demonstration of your exact vehicle or the RAVOOY kit. Follow your supplied film instructions for fluids, temperature, stretching and cure time.

A useful lesson from owner discussions

Ram owners with painted front bumpers describe concern about chips. That supports discussing the exact bumper coverage up front, but it does not prove this kit includes every possible bumper configuration. Read the discussion. This is an owner experience, not a test or endorsement of our product.

Is the film a universal fit for all 2019–2024 Rams?

No. This is the listed Laramie option, and cab, bed, generation and equipment still need a pattern match.

If a piece does not look right

Pause before cutting, stretching further or removing more backing. Send MotorPeak Supply your order number, kit label, exact vehicle details and photos showing the whole panel and the mismatch. Keep unused film and packaging. Review the return policy before altering a kit.

Fitment reference: supplier’s public listing, checked September 24, 2026. A listing is not a hands-on installation test. The kit supplied for your exact configuration remains the controlling pattern reference.